Consolidating ibm rs6000 servers
The 320 contains a 20 MHz microprocessor chip set and 8MB of memory is standard.The system may be configured up to 128MB (maximum) of memory.
RISC System/6000, or RS/6000 for short, is a family of RISC and UNIX based servers, workstations and supercomputers made by IBM in the 1990s.Some later models used the standardized PRe P and CHRP platforms, co-developed with Apple and Motorola, with Open Firmware.The plan was to enable the use of a multitude of operating systems such as Windows NT, Net Ware, OS/2, Solaris, Taligent, AIX and Mac OS but in the end only IBM's UNIX variant AIX was used and supported on RS/6000.Some models were marketed under the RS/6000 POWERstation and POWERserver names.The Model N40 was Power PC-based notebook developed and manufactured by Tadpole Technology for IBM.RISC System/6000, or RS/6000 for short, is a family of RISC-based UNIX servers, workstations and supercomputers made by IBM in the 1990s.
The RS/6000 family replaced the IBM RT computer platform in February 1990 and was the first computer line to see the use of IBM's POWER and Power PC based microprocessors.
RS/6000 was renamed e Server p Series in October 2000.
The first generations of RS/6000 systems used the Micro Channel bus technology but later models used PCI.
Many RS/6000 and subsequent p Series machines came with a service processor, which booted itself when power was applied and continuously ran its own firmware, independent of the operating system.
The service processor could call a phone number (via a modem) in case of serious failure with the machine.) although this name was apparently dropped later on, roughly around the same time that the simplified RS/6000 name was adopted for the computer line itself.
Linux is widely used on CHRP based RS/6000s, but support was added after the RS/6000 name was changed to e Server p Series in 2000.